Beta 75

Home| Engine| Beta 75

Kubota Model: V3600

Technical Specifications

  • Cylinders:4
  • Horse Power:75 @ 2600 RPM
  • Bore:98mm / 3.86"
  • Stroke:120mm / 4.72"
  • Cubic Capacity:3620cc / 220.9ci
  • Weight:414kg / 911 lbs
  • Transmission:TM345
  • Alternator:65 amp

Standard Engine Specifications

22″ (560mm) Mount Centers
C Instrument Panel
Flexible mounts
Heat exchanger cooling
High Inertia Flywheel
High Rise Exhaust Elbow for 3″ hose
Intake silencer / Air filter
Oil change pump (fitted)
Rear facing raw water pump
Shaft Coupling
Stop solenoid

This engine can only be imported into the USA as a replacement engine for an older non EPA compliant engine. Please contact us directly for full details.

Optional Items

Alternator 120 amp with Serpentine Belt Drive System
Alternator 175 amp with Serpentine Belt Drive System in standard position (internally regulated)
Alternator 120 amp Balmar with Serpentine Belt Drive System
2nd Alternator 175 Amp (12v) 2nd, engine mounted
Flexible coupling
Flybridge Panel
Hot water Fittings
Insulated Ground Electrical with 100 amp Alt
Insulated Ground Electrical with 70 amp Alt
Keel cooling
Long term storage (test run on Ensis oil and Calibration fluid)
Mount and pulley for Sea Frost compressorPanel –
Panel – NMEA 2000 Module (for C or CW panels only)  click for details
Panel – Type CW – Water Resistant Panel specs
Panel – Type D Digital Panel – Compatable NMEA 2000
Panel Recess with clear lid for C panel click here for recess dimensions
PTO Pulley (twin A sections)
Remote Oil Filter

 

Transmission Options

  • Transmission : standard - TM345
  • Bobtail : No gearbox but with drive plate or with Velvet Drive adation kit
  • PRM 260 : (Hydraulic) 1.96:1 / 2.94:1
  • PRM 500 : (Hydraulic) 1.94:1 / 2.5:1 / 2.9:1
  • ZF 25 : (Hydraulic) 1.97:1 / 2.80:1
  • ZF 25A : 8 degree Down angle (hydraulic) 1.9:1 / 2.29:1
  • ZF 45 : (Hydraulic) 2.2:1 / 2.5:1 / 3:1
  • ZF63IV : 12 degree V-drive (hydraulic) 1.56:1 / 1.99:1 / 2.47:1
  • Hydraulic soft ship block for PRM : option available for PRM 260 and PRM 500
  • TM 345 : Techno drive 2:1 / 2.47:1
  • TM 345 A : Technodrive 8 degree down angle 2:1 / 2.47:1
  • Tolling Valve for TM 345 : option available
  • TM 93 : Techno drive (Hydraulic) 2.09:1 / 2.4:1 / 2.77:1
  • TM 93 A : 8 degree down angle Techno drive 2.09:1 / 2.4 ;1
  • Trolling Valve for TM 93 : options available

    • Attachments

    • pdf PRM 260
      File size: 367 KB Downloads: 844
    • pdf ZF 25
      File size: 384 KB Downloads: 764
    • pdf ZF 25A
      File size: 297 KB Downloads: 741

NOTE: If these specifications don't meet your requirements. Please ask and we will quote you.