Beta 43 Saildrive

Kubota Model: V2003

Technical Specifications

  • Cylinders:4
  • Horse Power:43 @ 2800
  • Bore:80mm / 3.15"
  • Stroke:92.4mm / 3.64"
  • Cubic Capacity:1999
  • Weight:258 kg / 569 lbs
  • Transmission:Seaprop 60
  • Alternator:70 amp

Standard Engine Specifications

Saildrive Installation Instructions click here to download pdf file – Saildrive Seaprop 60 Installation Instructions.
17.75″ (450mm) Mount Centers
70 Amp alternator with Serpentine Belt drive
C Instrument Panel
Flexible mounts
Heat exchanger cooling
High Inertia Flywheel
Intake silencer / Air filter
Oil change pump (fitted)
Shallow oil pan
Standard exhaust injection elbow
Stop solenoid
Technodrive Seaprop 60 2.15:1 or 2.38:1

This Engine Meets 2018 Tier 3 Emission Regulations for US EPA and Category 1 Propulsion Engines for Marine Application

Optional Items

Alternator 120 amp with Serpentine Belt Drive System
Alternator 175 amp with Serpentine Belt Drive System in standard position (internally regulated)
Alternator 120 amp Balmar with Serpentine Belt Drive System
2nd Alternator 175 Amp (12v), engine mounted
Flybridge Panel
GRP Base for mounting in hull, including stainless ring
Hot water Fittings
Insulated Ground Electrical with 100 amp Alt
Insulated Ground Electrical with 70 amp Alt
Keel cooling
Long term storage (test run on Ensis oil and Calibration fluid)
Mount and pulley for Sea Frost compressor
Panel – Type CW – Water Resistant  click here for  panel dimensions and specs (for all panel types)
Panel – NMEA 2000 Module (for C or CW panels only)  click for details
Panel – Type D Digital Panel – Compatable NMEA 2000
Panel Extension harness with starter relay
Panel Recess with clear lid for C panel click here for recess dimensions
Propeller, 18″ diamter – 3 blade fixed with cone nut (alumn)
Propeller, Radici folding propeller 18″ x 13″
PTO Pulley (twin A sections)
Rear facing raw water pump
Remote Oil Filter
Standard oil pan
Water sensor for Saildrive Diaphragm

High Rise Exhaust Elbow for 2″ hose – 200mm rise
High Rise Exhaust Elbow for 2″ hose – Volvo style cross over

NOTE: If these specifications don't meet your requirements. Please ask and we will quote you.