Beta 38

Standard Engine Specifications

70 Amp alternator with Serpentine Belt drive
ABV Instrument Panel
Flexible coupling
Flexible mounts
Heat exchanger cooling
High Inertia Flywheel
Intake silencer / Air filter
Oil change pump (fitted)
Shaft Coupling
Shallow oil pan
Standard exhaust injection elbow
Stop solenoid
TMC 60 Transmission

This Engine Meets 2018 Tier 3 Emission Regulations for US EPA and Category 1 Propulsion Engines for Marine Application

Optional Items

Alternator 120 amp with Serpentine Belt Drive System
Alternator 100 amp Balmar with Serpentine Belt Drive System
Alternator 120 amp Balmar with Serpentine Belt Drive System
2nd Alternator 120 Amp 2nd, engine mounted
Flybridge Panel
Hot water Fittings
Insulated Ground Electrical with 70 amp Alt
Keel cooling
Long term storage (test run on Ensis oil and Calibration fluid)
Mount and pulley for Sea Frost compressor
Panel – Type A
Panel – Type ABVW – Water Resistant
Panel – Type B
Panel – Type BW – Water Resistant
Panel – Type C       click here for panel dimensions (all panel types)
Panel – Type CW – Water Resistant
Panel – Type D Digital Panel – Compatable NMEA 2000 (click for  specs)
Panel Extension harness with starter relay
Panel Recess with clear lid for B panel     click here for recess dimensions
Panel Recess with clear lid for C panel     click here for recess dimensions
PTO Pulley (twin A sections)
Rear facing raw water pump
Remote Oil Filter
Standard oil pan
High Rise Exhaust Elbow for 2″ hose – 150mm rise
High Rise Exhaust Elbow for 2″ hose – 200mm rise
High Rise Exhaust Elbow for 2″ hose – Volvo style cross over