Beta 60

Kubota Model: V2403

Technical Specifications

  • Cylinders:4
  • Horse Power:56 @ 2700 RPM
  • Bore:87mm / 3.43"
  • Stroke:102.4mm / 4.04"
  • Cubic Capacity:2434cc / 148.5ci
  • Weight:287kg / 631 lbs
  • Transmission:standard - ZF25M
  • Alternator:70 amp

Standard Engine Specifications

17.75″ (450mm) Mount Centers
70 Amp alternator with Serpentine Belt drive
C Instrument Panel
Flexible mounts
Heat exchanger cooling
High Inertia Flywheel
Intake silencer / Air filter
Oil change pump (fitted)
Shaft Coupling
Standard exhaust injection elbow
Stop solenoid
ZF25M transmission  * drawing shows additional options*

Optional Items

Alternator 120 amp with Serpentine Belt Drive System
Alternator 175 amp with Serpentine Belt Drive System in standard position (internally regulated)
Alternator 120 amp Balmar with Serpentine Belt Drive System
2nd Alternator 175 Amp (12v), engine mounted
Flexible coupling
Flybridge Panel
Hot water Fittings
Insulated Ground Electrical with 100 amp Alt
Insulated Ground Electrical with 70 amp Alt
Keel cooling
Long term storage (test run on Ensis oil and Calibration fluid)
Mount and pulley for Sea Frost compressor
Panel – Type CW – Water Resistant Panel specs
Panel – Type D Digital Panel – Compatable NMEA 2000
Panel Extension harness with starter relay
Panel Recess with clear lid for C panel click here for recess dimensions
PTO Pulley (twin A sections)
Rear facing raw water pump
Remote Oil Filter
Shallow oil pan

High Rise Exhaust Elbow for 2″ hose – 150mm rise
High Rise Exhaust Elbow for 2″ hose – 200mm rise
High Rise Exhaust Elbow for 2″ hose – Volvo style cross over

Transmission Options

  • Transmission : standard - ZF25M
  • Bobtail : No gearbox but with drive plate or with Velvet Drive adation kit
  • TMC 260 : Twin disc / Technodrive 2.47:1 / 2.88:1
  • PRM 260 : (Hydraulic) 1.96:1 / 2.94:1
  • ZF 25 : (Hydraulic) 1.97:1 / 2.80:1
  • ZF 25A : 8 degree Down angle (hydraulic) 1.9:1 / 2.29:1 / 2.7:1
  • ZF63IV : 152 degree V-drive (hydraulic) 1.56:1 / 1.99:1 / 2.47:1
  • Hydraulic soft ship block for PRM : option available for PRM 260
  • TM 345 : Technodrive 2:1 / 2.47:1
  • TM 345 A : Technodrive 8 degree down angle 2:1 / 2.47:1
  • Tolling Valve for TM 345 : option available
  • ZF 25M : 1.88:1 / 2.27:1 / 2.88:1
  • Attachments

NOTE: If these specifications don't meet your requirements. Please ask and we will quote you.