Beta 50 Saildrive

Kubota Model: V2203

Technical Specifications

  • Cylinders:4
  • Horse Power:50 @ 2800 RPM
  • Bore:87mm / 3.43"
  • Stroke:92.4mm / 3.64"
  • Cubic Capacity:2197cc / 134.1ci
  • Weight:300kg / 660 lbs
  • Transmission:Seaprop 60
  • Alternator:70 amp

Standard Engine Specifications

Saildrive Installation Instructions click here to download pdf file – Saildrive Seaprop 60 Installation Instructions.
17.75″ (450mm) Mount Centers
70 Amp alternator with Serpentine Belt drive
C Instrument Panel
Flexible mounts
Heat exchanger cooling
Intake silencer / Air filter
Oil change pump (fitted)
Shallow oil pan
Standard exhaust injection elbow
Stop solenoid
Technodrive Seaprop 60 2.15:1 or 2.38:1

Optional Items

Alternator 120 amp with Serpentine Belt Drive System
Alternator 175 amp with Serpentine Belt Drive System in standard position (internally regulated)
Alternator 120 amp Balmar with Serpentine Belt Drive System
Alternator 175 Amp (12v) 2nd, engine mounted
Flybridge Panel
GRP Base for mounting in hull, including stainless ring
Hot water Fittings
Insulated Ground Electrical with 100 amp Alt
Insulated Ground Electrical with 70 amp Alt
Keel cooling
Long term storage (test run on Ensis oil and Calibration fluid)
Mount and pulley for Sea Frost compressor
Panel – Type CW – Water Resistant Panel specs
Panel – Type D Digital Panel – Compatable NMEA 2000
Panel Extension harness with starter relay
Panel Recess with clear lid for C panel click here for recess dimensions
Propeller, 18″ diamter – 3 blade fixed with cone nut (alumn)
PTO Pulley (twin A sections)
Rear facing raw water pump
Remote Oil Filter
Standard oil pan
Water sensor for Saildrive Diaphragm
High Rise Exhaust Elbow for 2″ hose – 150mm rise
High Rise Exhaust Elbow for 2″ hose – 200mm rise
High Rise Exhaust Elbow for 2″ hose – Volvo style cross over

NOTE: If these specifications don't meet your requirements. Please ask and we will quote you.