Beta 30

Kubota Model: D1105

Technical Specifications

  • Cylinders:3
  • Horse Power:30 @ 3600 RPM
  • Bore:78mm / 3.07"
  • Stroke:78.4mm / 3.09"
  • Cubic Capacity:1123cc / 68.53ci
  • Weight:139kg / 306 lbs
  • Transmission:TMC 40
  • Alternator:70 amp

Standard Engine Specifications

16.14″ (410mm) Mount Centers
70 Amp alternator with Serpentine Belt drive
ABV Instrument Panel
Flexible coupling
Flexible mounts
Heat exchanger cooling
Intake silencer / Air filter
Oil change pump (fitted)
Shaft Coupling
Shallow oil pan
Standard exhaust injection elbow
Stop solenoid
TMC 40 transmission

Optional Items

Alternator 120 amp with Serpentine Belt Drive System
Alternator 100 amp Balmar with Serpentine Belt Drive System
Alternator 120 amp Balmar with Serpentine Belt Drive SystemAlternator 120 Amp 2nd alternator, engine mounted
Flybridge Panel
Hot water Fittings
Insulated Ground Electrical with 70 amp Alt
Keel cooling
Long term storage (test run on Ensis oil and Calibration fluid)
Mount and pulley for Sea Frost compressor
Mounts @ 14.5″ (370mm) centers (Yanmar GM Replacements)
Panel – Type A
Panel – Type ABVW – Water Resistant
Panel – Type B
Panel – Type BW – Water Resistant
Panel – Type C      click here for panel dimensions ( all panel types)
Panel – Type CW – Water Resistant Panel specs
Panel – Type D Digital Panel – Compatable NMEA 2000
Panel Extension harness with starter relay
Panel Recess with clear lid for B panel    click here for recess dimensions
Panel Recess with clear lid for C panel    click here for recess dimensions
PTO Pulley (twin A sections)
Rear facing raw water pump
Remote Oil Filter
Standard oil pan

High Rise Exhaust Elbow for 2″ hose – 150mm rise
High Rise Exhaust Elbow for 2″ hose – 200mm rise
High Rise Exhaust Elbow for 2″ hose – Volvo style cross over

Transmission Options

  • Transmission : standard - TMC 40
  • Bobtail : No gearbox but with drive plate or with Velvet Drive adation kit
  • TMC 40 : 1.45:1 / 2:1
  • TMC 60 : Twin disc/Technodrive 1.55:1 / 2:1 / 2.45:1 / 2.83:1
  • TMC 60 A : 7 degree down angle 2:1 / 2.45:1
  • TMC 60 Oil Cooler : for running LH in Ahead (NOT for TMC60A)
  • TMC 260 : 2:1 2.5:1
  • PRM 120 : 2.04:1 / 2.5:1 / 2.94:1
  • PRM 80 : 2:1 2.5:1
  • ZF 15MIV : 2.13:1 / 2.99:1
  • Attachments

NOTE: If these specifications don't meet your requirements. Please ask and we will quote you.